Connectors

Stainless Steel Mounting Clip Stainless Steel Mounting Clip WEI-TS35-FM5 Stainless steel clip which can be used to secure G rail to DIN rail for ez of accessory installation. Uses M5 screw/bolt to secure clip to G Rail, and...

VX 5 Point Protector including Module VX 5 Point Protector including Module CM-VX-MD-XGP2 The VX-connection module provides a connection point between an exchange-side cable pair and a distribution pair. It incorporates a 5 point...

3M QSA Disconnection Module 3M QSA Disconnection Module CM-IDC-QSA/D 3M QSA Series 2 Full disconnection module for jointing upto 10 pairs Suitable for solid wires diameter 0.4 to 0.8mm with overall diameter 0.7 to 1.5mm...

Krone 237a LSA-PLUS Disconnection Module Krone 237a LSA-PLUS Disconnection Module CM-IDC-K237A LSA-PLUS Series 2 Full disconnection module for jointing upto 10 pairs Suitable for solid wires (with one wire) diameter 0.35 to...

Scotchlok 557TG Self-Stripping dropwire IDC connector (as manufactured by 3M, part 557TG) capable of connecting two solid copper wires, in the range of 0.6-1.29mm. The maximum insulation diameter is...

UDW2 Large Conductor Connector UDW2 Large Conductor Connectors CM-SK-UDW2 A sealed moisture-resistant four-wire (1 full pair) inline aerial connector for copper or copper-coated steel conductors. Maximum insulation 4.4...

Tel-splice Tel-splice IDC sealant filled connectors provide an economical and reliable method for splicing telephone cable conductors. Conductor range is 0.4-0.9mm with a maximum insulation diameter...

STL5 Terminal Block STL5 Terminal Block WEI-STL5 G Rail TS32 mounted sliding link terminal block for stranded wires up to 2.5 sq mm. Recommended minimum enclosure IP rating of IP55. G Rail available: TS32 (G Rail,...

Standard 2BA Terminal Block Standard 2BA Terminal Block CM-2BZ-KIT Terminal Block for up to 3 pairs of terminations. Washers and nuts supplied. Recommended minimum enclosure IP rating of IP55. Call Passcomm today...

3M UDC IDC T211 3M UDC IDC T211 CM-T211-1K The 3M Scotchlok Trim-Out connector is a ''no-break change'' maintenance connector. The connector is polypropylene IDC with a built in cut-off blade and test port. Wires...

10 Pair VX Enclosure 10 Pair VX Enclosure CM-JB10-VX-U-1/5 PADS 087/039422 Plastic enclosure (tunnel box) with 1x10pair cable input and 5x2pair cable outputs, - 10 VX modules mounted on standard DIN rail -...

VX 3 Point Plug In Module VX 3 Point Plug In Module CM-VX-PM-PG04 The 3 point plug in module is used in the VX product family blocks to provide continuity and protection from overvoltage. The 3 point plug in module includes...

VX 3 Point Protector including Module VX 3 Point Protector including Module CM-VX-MD-CG04 The VX-connection module provides a connection point between an exchange-side cable pair and a distribution pair. It incorporates a 3 point plug...

VX Module The Mondragon VX-connection module provides a connection point between an exchange-side cable pair and a distribution pair. Removal of the plug-in module does not disturb wire connections but makes...